Warmduscher original
2nd generation
- recovers up to 40% of the energy used while showering
- made to save energy for a lifetime
- nice feeling while showering because of plateau made of bamboo
- made in our manufactory in Hannover
Required: a space of 500x600mm in your shower & a mounted mixing tab
If you have any questions, don’t hesitate to contact us: via mail orwhatsapp.
If you want to calculate your savings click here.
- heat exchanger made of stainless steel
- bambooplateau, 600mm x 500mm x 35mm
- hose to shorten yourself (4 meters)
- special adapter & extension (incl. seals)
- wooden brush for cleaning
- installation instruction
What you need to install the Warmduscher:
- approx. 10 min time
- scissors
- spanner (30)
- Turn off the water
- Screw the special adapter onto the mixing tap
- Put Warmduscher in the shower & connect hoses
- Turn water on again
- average saving 4 kW
- weight: ca. 10 kg
- maximum working pressure: 5 bar
- maximum load 300kg (DIN EN 1253-1 K3)
- pressure loss: 0,34 bar at a flow of 6,7 l/min
- thread of adapter and extension: 3/4" internal/external thread
- meets the requirements of DIN 806-2
- The heat exchanger is made of 100% stainless steel.The plateau is made of high quality, mold resistant bamboo